MVS has successfully commissioned 5 PSA Nitrogen plants to an Indian multinational conglomerate company on the west side of the Hazira peninsula. The group is the largest port developer and our 5 large capacity Nitrogen plants are running to provide blanketing of oil and gas tanks.
Customer procured PSA Nitrogen Gas Plant from MVS of following specifications:
Technology : PSA Technology
Capacity: 775 NM3/hr each
Application: Blanketing of Oil and Gas Tanks
In Refinery and Chemical plants explosive hazards occur if air enters tanks containing volatile flammable liquids during pumping operations. Vacuum develops when liquid is removed from the tank or ambient temperature reduces.
For optimum protection of tank, contents and the environment, a low positive constant N2 gas pressure is maintained in the vapor space of a storage tank. A blanketing gas, Nitrogen being the most popular, serves to reduce the oxygen content in the vapor space, making it inert and eliminating the possibility of fire/explosion.
This prevents the ingress of air and moisture from entering the storage tanks. When liquid is removed from a tank or ambient temperature reduces, vacuum may develop. Blanketing system prevents any vacuum from developing and maintains the desired blanket pressure. In addition to this, a blanket gas pressure, reduces the evaporation of the stored product to a negligible amount. The result not only conserves product but also greatly reduces emissions. Quality of chemical, which get affected by contact of moisture or oxygen is protected by nitrogen blanketing. These advantages are in addition to the fire protection that is provided as a result of using nitrogen.
Blanketing of Oil and Gas
Tank blanketing, also referred to as tank padding, is the process of applying nitrogen gas to the empty space in a storage container. Though tank blanketing is used for a variety of reasons, it typically involves using nitrogen gas to protect products inside the storage container.
A few of the benefits of blanketing include a longer life of the product in the container, reduced hazards, and longer equipment life cycles.
About MVS Engineering Limited
MVS Engineering is a turnkey supplier of Gas generation equipment for Nitrogen, Oxygen and Hydrogen gases. We also manufacture Air, Gas, Liquid Dryers and Gas Purification systems. MVS is the largest supplier of gaseous Nitrogen, Oxygen and Hydrogen plants in India. Besides India, MVS also regularly exports it’s equipment to the Middle East, Africa, South East Asia and Europe.
MVS was founded in 1977 and for last 38 years has supplied over 8000 skid-mounted units worldwide. Read more about the company in the About Us section of our website.