• Contact US
  • Mail
  • Enquiry

Nitrogen + Methanol Generator

Flow Converter

Pressure Converter

MVS exhibiting in Bangladesh at Asia Pharma Expo

16 Jan, 2017

MVS Engineering Ltd.  is pleased to announce its participation in The 9th International Exhibition on complete Pharma Manufacturing exhibition and conference widely known as “Asia Pharma Expo” (23-25 February, 2017) at International Convention City Bashundhara (ICCB), Dhaka, Bangladesh. We decided to mark our presence in this renowned expo in Bangladesh as Pharmaceutical is one of the…

Read More

Nitrogen usage in milk packaging / milk powder retail pouch packing

30 Sep, 2016

MVS manufactures high purity nitrogen generators for use in milk powder packaging & also in packaging of Food products / cereals. Many milk powder manufacturing units are using MVS nitrogen generators in India and other countries such as Malaysia, Bangladesh, Sri Lanka, UAE, Nigeria etc . MVS nitrogen gas generation plants are skid mounted units, supplied in ready…

Read More

MVS Medical Oxygen Generators

21 Sep, 2016

MVS manufactures fully automatic Oxygen generators to produce 95% purity Oxygen from air.  Electrical power is the only running cost.   Cost of Oxygen generation is less than 0.15 USD$ (15 cents) (Rs. 10) per cubic meter. The gas generator is skid mounted, fully automatic for round the clock working. Oxygen purity is continuously displayed on the…

Read More

True cost of Gas you buy in cylinders

3 Sep, 2016

Disclaimer: This article is highlighting areas of concern which are unknown to many customers. It is only meant to be a handy tool for customer awareness and should be used for informational purposes only. When purchasing a cylinder, the user or the purchaser at a minimum is aware of the following:   • Size of…

Read More

Why Medical Oxygen generator makes sense for hospitals?

24 Aug, 2016

We get asked a lot of questions regarding why it makes sense for a hospital to invest in a medical oxygen generator. We compile some of the important queries and try to answer them here in a concise format Is the oxygen produced in onsite oxygen generator pure and same as the cylinder oxygen? Oxygen produced by…

Read More

Nitrogen-Hydrogen (HNX) mix gas requirement for Galvanizing of Steel Sheets

4 Aug, 2016

Galvanization (or galvanizing as it is most commonly called in the Steel industry) is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The quality of the processing relies on the ability to handle correctly the heat cycle and the strip surface by the control of three processing parameters. A gas…

Read More

Carbon Molecular Sieves – Explained

26 May, 2016

Carbon Molecular Sieves (CMS) are used in PSA (pressure swing adsorption) Nitrogen gas generators. CMS also finds use in other separations like Hydrogen refinement from crude sources and also biogas refining. However, in this blog, we specifically referring to CMS for Nitrogen production. CMS operates at a molecular level and under pressure separates oxygen from nitrogen when fed…

Read More

Medical Oxygen Generator for 125 bed hospital in Uttar Pradesh

7 Apr, 2016

MVS has successfully commissioned another 10 NM3/hr Capacity Medical Oxygen generator in a leading 125 bed hospital in Allahabad. This is our Fourth Medical Oxygen generator installation in Northeast India, others are being successfully running in other leading Hospitals. Customer procured PSA Medical Oxygen Gas Plant from MVS of following specifications: Technology: PSA Oxygen Technology Capacity: 10 NM3/hr…

Read More

Blanketing of Oil and Chemical Tanks using Nitrogen Generator

11 Nov, 2015

MVS has successfully commissioned 5 PSA Nitrogen plants to an Indian multinational conglomerate company on the west side of the Hazira peninsula. The group is the largest port developer and our 5 large capacity Nitrogen plants are running to provide blanketing of oil and gas tanks. Customer procured PSA Nitrogen Gas Plant from MVS of…

Read More

Pigging using Nitrogen Gas

11 Oct, 2015

MVS recently commissioned 2 – PSA Nitrogen plants to an Indian multinational conglomerate company. Its diversified businesses includes resources, logistics, agribusiness and energy sectors. The Group is the largest port developer and our 2 plants are supplied to their oil tanking terminal in Western India. Customer procured PSA Nitrogen Gas Plant from MVS of following…

Read More

Oxygen Gas for Delignification and Bleaching

6 Oct, 2015

4 months ago MVS has successfully supplied and commissioned Oxygen Gas Plant to one of the biggest Agro based paper plants located in Punjab. They manufacture Paper using wheat straw, sarkanda etc. The company has manifested itself as quality producer of writing/printing paper. Customer purchased Oxygen Gas Plants from MVS of following specifications: Technology: PSA…

Read More

Nitrogen Gas for Food Packaging

25 Jul, 2015

MVS has supplied a Nitrogen Gas Plant to a Fortune 500 Food products company located in Pune. The customer’s policy that its food products should be moisture-free, nutritious, tasty, hygienic and offers convenient options to the consuming public could not be met unless the packaged foods were protected in a MAP (modified atmosphere packaged) like…

Read More

Nitrogen – A blessing to the Oil & Gas Industry

30 Apr, 2015

Nitrogen a colorless, odorless gas, is a non-hydrocarbon inert gas used for a variety of functions in the drilling, work over and completion phases of oil and gas wells as safety is a top priority in the oil and gas industry. Nitrogen ensures safety during tank cleaning operations and other situations where an inert atmosphere…

Read More

MVS Engineering at ADIPEC Abu Dhabi, 2014

14 Nov, 2014

MVS Engineering Ltd proudly participated in successful participation in ADIPEC-2014 (Abu Dhabi International Petroleum Exhibition and Conference) held in the City of Abu Dhabi, UAE (Nov 10 – Nov 13). ADIPEC-2014 has been established as one of the largest conference programmes globally, themed under ‘Challenges and Opportunities for the Next 30 Years’. Around 2,000 exhibiting companies displayed…

Read More

Use of Nitrogen Generator in Refrigerant and HVAC industry

23 Jul, 2014

Refrigerants are what make air conditioning possible. Contained within the coils of an air conditioner, these liquid agents cool and dehumidify indoor air.

Read More

Nitrogen Plant supplied for Controlled Atmosphere Cold Storage

14 May, 2014

MVS has supplied a Nitrogen Inert Gas Plant to one of the leading ISO certified manufacturers of CA (Controlled Atmosphere) Cold Storage.

Read More

Nitrogen Generators for oil pipeline pre-commissioning

15 Feb, 2014

MVS Engineering is a leading supplier of Mobile – Containerized – Nitrogen generators (like the one pictured) to the Oil & Gas industry.

Read More

Nitrogen Gas for Bright Annealing of Copper and Cupro Nickel

20 Dec, 2013

MVS has supplied a Nitrogen Gas Plant to one of the leading Indian manufacturer and exporter of seamless extruded Copper, Copper Alloy Products, Cupro Nickel, Cunifer, Aluminium Brass, Admiralty Brass.

Read More

Membrane Nitrogen Generator for Oil Tank Farm

13 Dec, 2013

At Fujairah Port there is big tank farm storage facility of various crude and other oils.

Read More

Nitrogen gas in HT Electrical Cable Manufacturing

30 Nov, 2013

High tension cables (33 KV to 210 KV) are manufactured world-wide under Nitrogen atmosphere curing. MVS has supplied 25-Nitrogen Plants for such application to several countries in Asia and Middle-East. Earlier steam curing of electrical cables was done but due to moisture present, the cable insulation always had some moisture left due to which insulation…

Read More

Flow & Pressure Converters added to product pages

23 Jul, 2013

It is quite common in the industry to speak in different units when talking about flow, pressure, temperature etc. MVS Engineering, following general norms in India, typically presents it’s equipment parameters in: Flow – Cubic meter per hour Pressure – Bar Many of our customers from all over the world, use units such as: Flow…

Read More

Power Plant equipment protection with Nitrogen inert gas

15 Jul, 2013

Over the last decade, several hundred power plants have come up or are in different stages of implementation and commissioning over the next 3-4 years. While a major chunk of these power plants are being constructed by major Indian Government entities such as NTPC and individual State Electricity Boards, many of these power plants are…

Read More

Nitrogen Inert Gas Plant Supplied to leading Cement Company in Karnataka, India

25 Jun, 2013

MVS has supplied a Nitrogen Inert Gas Plant to one of India’s leading cement manufacturing company. This customer is located in Karnataka, India. They require Nitrogen for purging of coal mill, bag filters and coal silos to control of fire due to spontaneous ignition of coal powder. Customer has procured Nitrogen Inert Gas Plant from…

Read More

Why Fuel Cells for Telecoms Backup is a Good Call – a report from FuelCellToday

9 Jun, 2013

FuelCellToday, The leading authority on fuel cells, has recently published a report on why fuel cells are the right move for telecom tower backup power. Article excerpt: The fuel cell is a versatile and scalable enough technology to fulfil power requirements in almost any imaginable application. In India there are 65,000 BTS being installed each…

Read More

PSA Nitrogen plant supplied to leading HVAC company in Sharjah, UAE

1 Jun, 2013

MVS has supplied a PSA Nitrogen gas plant to one of UAE’s leading HVAC equipment company. Our customer in Sharjah (UAE) is a manufacturer of air conditioning systems, chillers and refrigeration coils. They require Nitrogen for their process purging and also high-pressure testing of coils. Customer has procured Nitrogen Plant from MVS of following specifications…

Read More

Exhibit at Power-Gen India 2013 a phenomenal success

24 May, 2013

MVS Engineering and Proton OnSite exhibited at Power-Gen India 2013 for third year running and our exhibit, as previous cases, was a phenomenal success. Many Power Plants in India in the private sector have been in operation for the last 5-10 years and are now quite mature. The focus of these power plants has now…

Read More

Nitrogen gas plant supplied for Heat Treatment Application

23 May, 2013

MVS has supplied a PSA Nitrogen gas plant to an Industrial facility in Jharkhand. Our customer is a manufacturer of Heavy earth moving equipments with Japanese collaboration. Customer has procured Nitrogen Plant from MVS of following specifications : Technology: Pressure Swing Adsorption (PSA) Capacity: 15 Nm3/hr Purity: 99.99% MVS Engineering had undertaken this project for…

Read More

Membrane Nitrogen gas generator for carrier gas purpose

9 May, 2013

MVS has supplied a Membrane type Nitrogen gas generator for a Government of India laboratory. This customer has procured the Nitrogen gas plant from MVS of the following specifications: Technology: Membrane (Membrane) Model: ZEN-Series Membrane Nitrogen Generator Capacity (Nitrogen flow rate) : 42 Nm3/hr (700 LPM) Purity : 95% This is a complete plant supply…

Read More

Oxygen gas plant for lead-acid battery manufacturing process

9 May, 2013

MVS has supplied a Oxygen gas generator of PSA type for a very large battery manufacturer for their manufacturing unit in South India. This customer has procured the Oxygen gas plant from MVS of the following specifications: Technology: Pressure Swing Adsorption (PSA) Purity : 93% This is a complete plant supply on Turnkey basis with…

Read More

Nitrogen plant supplied for chemical blanketing application

6 May, 2013

MVS has supplied a Nitrogen gas generator of PSA type for a large chemical manufacturing facility in Gujarat. This customer has procured the Nitrogen gas plant from MVS of the following specifications: Technology: Pressure Swing Adsorption (PSA) Capacity (Nitrogen flow rate) : 10 Nm3/hr Purity : 99.7% This is a complete plant supply on Turnkey…

Read More

Membrane Nitrogen plant for insecticide production unit

5 May, 2013

MVS has supplied a large Membrane type Nitrogen gas generator to one of world’s leading insecticide manufacturer’s facility in Gujarat. This multinational customer has procured a Nitrogen gas plant from MVS of the following specifications: Technology: Membrane Capacity (Nitrogen flow rate) : 75 Nm3/hr Purity : 99% This gas plant was supplied to interface with…

Read More

Cost of Nitrogen

26 Apr, 2013

Unless the requirement for Nitrogen is very large (typically above 2,000 Nm3/hr), it is much more economical to produce your own Nitrogen using a captive Nitrogen plant (PSA or Membrane technology) than to get Nitrogen through a liquid supply contract or delivered Nitrogen cylinders. We present a easy to decipher cost comparison below. The cost…

Read More

Proton OnSite making good progress on reducing cost of hydrogen energy storage

10 Apr, 2013

Proton OnSite has reduced the cost of producing water electrolysis stacks by 40 percent over the last five years, enabling the firm to begin producing a cost-effective multi-megawatt electrolyser for the emerging renewable energy markets. Read more on this interesting article written about our Principals for Water Electrolysis Hydrogen Generators here (link opens in new…

Read More

Why switching to On-Site Hydrogen Leads to Better Results

15 Mar, 2013

Our Principals – Proton OnSite (USA) have published a very useful article pertaining to use of Hydrogen in laboratories it’s on-site production. We are reproducing this article verbatim and also providing a downloadable article for our audience and customers. WHY SWITCHING TO ON-SITE HYDROGEN LEADS TO BETTER RESULTS Laboratory practitioners need a carrier gas they…

Read More

Cutting Tools production requiring Pure Argon, Hydrogen & Nitrogen – An MVS success story

18 Nov, 2012

Cutting tools technology has already advanced to the new levels of metals machining – literally – cutting edge, delivering enhanced performance. Machining times have reduced and attained higher accuracy and smoother finishes. The coating of wear resistant and chip resistant hard metals on to cutting steels and carbides require ultra pure ‘reducing atmosphere’ and ‘atmosphere…

Read More

Hydrogen Workshop Media Coverage

25 Oct, 2012

MVS Engineering and our Principals – M/s. Proton OnSite (USA) recently concluded a workshop on 17th September, 2012 at India Habitat Center – “Taking India Forward – Investing less on Hydrogen Facility and achieving better efficiency and safety”. This event was covered by our media partners for the workshop – PowerWatch magazine. The same can…

Read More

Photographs from Hydrogen Workshop for Power Sector

12 Oct, 2012

The workshop held on 17th September, 2012 at India Habitat Center – “Taking India Forward – Investing less on Hydrogen Facility and achieving better efficiency and safety” was an astounding success and was attended by several leading organizations of India. We present some of the photographs of this event. Workshop Setup Meet & Greet Dr….

Read More

Hydrogen Workshop for Power Sector – An astounding success

17 Sep, 2012

The workshop held today at India Habitat Center – “Taking India Forward – Investing less on Hydrogen Facility and achieving better efficiency and safety” was an astounding success. With the blessings of the Hydrogen Association of India, this workshop was organized by MVS Engineering Limited and Proton OnSite (USA). The event was attended by nearly…

Read More

PSA Nitrogen versus Cryogenic Plants

6 Sep, 2012

We have prepared a useful summary sheet to help customers make an informed decision whether to invest in a PSA Nitrogen plant or a cryogenic plant. S. No. Cryogenic Nitrogen Generator PSA Nitrogen Generator 1) Investment cost of Cryogenic Nitrogen plant is very high. Typically, it is more than double that of an equivalent PSA…

Read More

Upcoming workshop – Hydrogen in Power Plants

30 Aug, 2012

We are pleased to announce an upcoming workshop being conducted by MVS Engineering and Proton OnSite (USA), under the aegis of Hydrogen Association of India. The Theme of the workshop is “Taking India Forward” and the workshop aims to address how Indian power plants can benefit from “Investing less on Hydrogen Facility and achieving better…

Read More

PowerWatch India Magazine Article – Hydrogen Delivery in Power Plants – Call For Modernization

21 May, 2012

We are pleased to report that an article authored by our Hydrogen Sales team has been published inPowerWatch India, May 2012 issue. We reproduce the article below for easy reference. — Article text begin — With the advent of modern and technologically advanced equipment in the power sector, specifically higher capacity Turbine Generators, Hydrogen gas…

Read More

Hydrogen – Think out of the box

12 May, 2012

When it comes to Hydrogen, two things are foremost on decision maker’s and technical evaluators minds – Safety and Cost. We encourage you to think out of the box and allow us to demonstrate how with the Proton Hydrogen Generators, you can deliver Hydrogen to your process, literally, “Out of the Box”. About Proton OnSite,…

Read More

Customers increasingly adopting On-Site Hydrogen Generators

2 May, 2012

Hydrogen today plays a very important role in various industrial applications. Purity of hydrogen, reliability of supply and ease of use are primary considerations when it comes to choosing among the various options of supply. In the past the hydrogen gas plants were considered to be an asset of those who have the technical expertise…

Read More

On-site Hydrogen Helps Manufacturers Reach Strategic Goals for the Metals Processing Industry

13 Apr, 2012

Our Principals for compact, safe and reliable On-Site Hydrogen Gas Generators – Proton OnSite have supplied Hydrogen Gas Generators to the metallurgical industry for over a decade. Recently, they have published an article looking at the use of Hydrogen in the metals processing industry and how Proton’s units have had wide-acclaimed success. An excerpt of…

Read More

Hydrogen Fuel Cells Backup Power for Telecom Towers – India progresses

14 Mar, 2012

The Hydrogen economy in India is undoubtedly progressing and it is progressing fast! In a recent advance, forward thinking Executives at one of India’s largest corporate house – Aditya Birla Group, through their telecom business – Idea Cellular have taken the step towards implementation of Fuel Cells for Backup power. Cliches aside, Idea Cellular has…

Read More

Autorickshaws & Hydrogen – Innovation in India

14 Feb, 2012

Amazing! Exciting! A giant leap Forward! This in essence captures our viewpoint on Hydrogen development in India. We are excited to see that finally “Hydrogen Fueled Vehicles” in India is getting to the point where it is moving beyond just labs and theoretical discussions. Recently, Times of India published an article that speaks about New…

Read More

Increasing Generator Efficiency And Capacity: A CASE STUDY by Proton OnSite

6 Dec, 2011

The purity of hydrogen used within electric power generators has a direct affect on cooling efficiency, windage friction losses, generating capacity and generator longevity. Hydrogen’s high thermal conductivity is the primary reason it is used as the cooling media in a generator instead of air. Hydrogen has a thermal conductivity of nearly seven times that…

Read More

India struggles to fight Food inflation – Nitrogen can rescue

2 Dec, 2011

Deterioration of Fruits, Vegetable, and other staple foods happens because of enhanced speed of “aging”. Speed of aging of Fresh Agri produce is directly proportional to ambient temperature, and the presence of ‘oxygen’. Reduce the ambient temperature and storage period increases. Reduce or eliminate ‘oxygen’ and the process of ripening (also equivalent to aging) slows…

Read More

India suffers from expensive and inefficient Hydrogen facility planning of Thermal Power plants

22 Nov, 2011

Hydrogen, the lightest, highest energy content and most combustible gas must be treated with caution. Past 60 years, our engineers and plant owners have had to contend with old technology plants using corrosive Caustic lye, and for umpteen reasons, difficult to control for safety, plant engineering. With such profound and dangerous experience, with great aplomb,…

Read More

Modified Atmosphere Packaging – A growing need for the Indian Food Industry

1 Sep, 2011

Packaged food industry is rapidly growing in India. Over the last 10 years, there has been a mushrooming growth of companies with a very regional focus. However, this is still a largely unorganized sector and concepts of robust supply chain and distribution chain haven’t truly pervaded the mindsets of budding entrepreneurs. However, as many start-up…

Read More

A strong Hydrogen supply backbone required in India

26 Aug, 2011

Other than Chlor Alkali plants who make up majority of the bulk Hydrogen gas in India, there is a need in India for establishment of Merchant Hydrogen plants. Such Hydrogen plants located at least 200 kilometers radius away from Chlor Alkali plant, present a ?Profitable Business Opportunity?. Merchant Hydrogen gas plants can be based on…

Read More

How markets determine the price of Hydrogen

12 Aug, 2011

Hydrogen price to the customer is dependent on several factors such as demand and supply and also transportation cost. However, at a bare minimum, the fundamental cost of Hydrogen production is typically the largest contributor for determination of price to the customer. We look at these various elements in detail below. Equating with the price…

Read More

Need to introduce high pressure bullet vessels for delivered Hydrogen

1 Aug, 2011

Hydrogen is the lightest element. Technically it is more challenging to liquefy in comparison to Nitrogen or Oxygen, though surely possible. We just cannot escape the fact that the gas transport vessel is much heavier than the gas per se, unless liquefied. The pressure determines the transport cost. The next cost determinant is volume of…

Read More

Nitrogen Gas is a viable and cost effective option in Pharmaceuticals Industries

29 Jul, 2011

Due to effect of its end product on human health and environment, pharmaceutical industries process their products with very precision and utmost care. Even a very minor ignorance can lead to a hazard. The pharmaceutical needs to be very precise about its product from its manufacturing to packaging and transportation. Oxygen in the atmospheric air…

Read More

Exhibit at Power-Gen India 2011 a true success

9 May, 2011

MVS Engineering Limited and Proton OnSite, USA recently exhibited jointly at Power-Gen India 2011 at Pragati Maidan, New Delhi. This exhibit was a key milestone in the partnership between the two companies and goes on to further demonstrate our commitment to the growing Indian market for reliable, compact, no-hassle Hydrogen Generators. In case you were…

Read More

Understanding Hydrogen and it’s impact on Power Producer’s bottomline

26 Apr, 2011

Unknown to many, Quality of Hydrogen in a Hydrogen-cooled Turbine Generator plays an important role for the bottomline of a Power generation utility. Some power generation companies are paying attention to this and deriving benefits including improved efficiency, better yields from same fossil burn. We explore the simple physics behind this and why the Power…

Read More

Hydrogen cylinders and CCoE

11 Mar, 2011

The applicable rule for Receiving, Storing and Handling Hydrogen Gas cylinders in a “industrial premises” or “Gas Distribution premises” or any other type of premises, is guided by the regulations stated in The Petroleum and Explosives Safety Organisation (PESO) / Chief Controller of Explosives (CCoE) – “Gas Cylinder Rules – 2004“. We discuss and highlight…

Read More

Hydrogen & 2011 Indian Budget

1 Mar, 2011

It is great to learn about the impetus the Indian government is providing to alternative fuels and technologies. One shot in the arm for this fledgling industry is the provisions proposed in the 2011 Indian budget. This article published in Hindustan Times provides some preliminary details. Article link on HT : http://www.hindustantimes.com/Mukherjee-unveils-green-rebates/Article1-667872.aspx Relevant snippets from…

Read More

Hydrogen – Fuel of the future

1 Feb, 2011

Times of India today ran an interesting article about Hydrogen as the fuel of the future and advancements in research and technology. The article is presented below verbatim and link to TOI is also provided. Article link on TOI : http://www1.lite.epaper.timesofindia.com/mobile.aspx?article=yes&pageid=23&edlabel=CAP&mydateHid=01-02-2011&pubname=&edname=&articleid=Ar02303&format=&publabel=TOI&max=true Article reproduced verbatim – — BEGIN — London: British scientists have developed a low-cost…

Read More

Nitrogen Gas Generators for Pharmaceutical Industries

6 Dec, 2010

The inert properties of Nitrogen gas makes it ideal blanketing gas in pharmaceutical application where it is needed to prevent oxidation and degradation of chemicals and powder by atmospheric oxygen and moisture. Protection is achieved by keeping these items under Nitrogen atmosphere. This is also termed as Nitrogen Blanketing, Nitrogen Padding or Nitrogen Inertisation in…

Read More

VPSA Oxygen plant for ODL line – Repeat Order completion

28 Aug, 2010

MVS Engineering is proud to announce successful delivery and handover of VPSA Oxygen plant to a reputed Paper Mill in India. Mr. K.K. Mehrotra (Business Manager) notes that this is a repeat order from the same customer who had purchased an Oxypure VPSA Oxygen Gas Generator from MVS Engineering earlier. After successfully operating the plant…

Read More

Nitrogen Gas Generator for Snack Food Packaging

19 Aug, 2010

Nitrogen Gas is being increasingly used in the processed food industry and specially for packaging purposes. We explore the benefits of Nitrogen gas for Snack food packaging application. Shelf life of snack foods like Potato chips, extruded snacks, Breakfast cereals, Nuts and other dry fruits can be improved by expulsion of the air surrounding the…

Read More

Inertization of Coal Mill, Silos & Bag Filters in the Cement Industry

16 Jul, 2010

For inertization applications in various industries, traditionally many have opted for fuel based inert gas systems. While this technology was dominant in the past, it has very quickly been replaced by the cleaner, cost effective and much more efficient Nitrogen systems. So, we look at the two systems and provide a comparison of their features….

Read More

Inert Gas Generator for Ships

30 Jun, 2010

Shipping lines are increasingly installing Inert Gas Generation systems on board as the cost of these systems is very reasonable and the benefits far outweigh the risks of not having one. The origin of today’s Inert Gas Systems on ships and oil tankers can be traced back to a number of fire accidents around 20-25…

Read More

MVS Gas Purification Unit for Float Glass Unit

3 May, 2010

MVS continually partners with customers to understand their process and innovate with solutions that can help customers in streamlining their process and in several cases assist with cost savings efforts. On this note, MVS has supplied a Gas Purification unit for the Float Glass industry where our customer is now able to recover 70% of…

Read More

VPSA Oxygen plant operational

30 Apr, 2009

MVS Engineering is pleased to announce successful commissioning of one more large capacity VPSA Oxygen plant. This plant is being used for oxybleaching process in the Paper industry for bleaching and delignification processes. MVS has supplied large capacity VPSA plants to a prestigious client in Western India. The plants were delivered within the committed timeframe…

Read More

MVS ships another mobile PSA Nitrogen Generator

10 Mar, 2009

MVS Engineering is proud to announce design and successful manufacturing completion of another containerized mobile PSA Nitrogen generator. With this, MVS has successfully cemented its position and is one of a handful companies in the world who are designing and supplying such mobile nitrogen plants. MVS customer in the middle east intends to use this…

Read More

Export of Exo-Gas Generator to Europe

9 Mar, 2009

MVS Engineering is a leading manufacturer of a variety of Gas Generation Solutions. We are market leaders in EXO-GAS generation systems and have recently exported one such system to Europe. Normally, Exo-Gas Generators (link will open in a new window) produce gas of +5°C Dew point. When the customer approached us regarding their requirement, dew…

Read More
Enquiry about Nitrogen + Methanol Generator