A lithium-oxygen battery is theoretically made of a lithium anode and oxygen cathode, which are separated by a suitable electrolyte that allows the flow of Lithium ions. A thin layer of LiO2 is formed on the negative electrode, which increases the capability of the battery. Thus, a huge quantity of oxygen is needed to form the porous cathode of a Lithium-oxygen battery. MVS Engineering Pvt. Ltd offers a powerful oxygen plant that can continuously supply oxygen for battery manufacturing.
Remarkable traits noted in an MVS Engineering oxygen generator.
Since oxygen is the main component of all lithium-oxygen batteries, a steady supply of this gas is essential for manufacturing these products. Thus, battery manufacturers prefer the oxygen generators of MVS Engineering. The following are some notable features of this onsite oxygen plant.
Can be installed very easily
MVS Engineering has designed an oxygen generator with simple installation features. Thus, anyone can install this device at the production site of a battery manufacturing company, even without any technical knowledge. The regular maintenance of this oxygen plant is also a simple affair and does not require much time or manpower.
Automatic operation
The portable oxygen plant of MVS Engineering operates automatically without any further commands apart from switching on and off. Thus, no extra manpower is needed to operate this device, as any staff can switch it on to receive oxygen for battery manufacturing.
The capacity of producing bulk volumes
The industrial production of lithium-oxygen batteries demands a large amount of oxygen. Thus, MVS Engineering has ensured sufficient production of pure oxygen continuously from its PSA oxygen plants to fulfil the requirements of its clients.
The convenient flow rate of oxygen
Normally, the oxygen flows out at the rate of 5lpm (litres per minute), which is high enough to meet the production requirement of a company. This flow rate enables to fill of 195 cylinders per day due to the continuous production of oxygen.
Production of pure oxygen
The oxygen generator of MVS Engineering is designed to produce oxygen with a purity level of 93 – 96%. If this purity level drops below 90% due to any malfunctioning of the device, it rings an alarm sound before stopping oxygen production. However, the automatic switch panel of this generator shifts to a backup arrangement to continue the oxygen supply meanwhile the production is restored.
Also Read
-
Industrial Gas Plants For Manufacturers, Innovators And Service Providers
-
-
Reliable Supply And Control Over Costs – Big Drivers For Onsite Gas Solutions
-
-
Hence, the PSA oxygen generator provided by MVS Engineering is ideal for getting abundant oxygen for battery manufacturing in relevant companies.
