Modern lithium batteries are manufactured with a new technology where oxygen is needed to deliver better stability and higher energy output. All previous shortcomings are now eliminated from these lithium batteries, making them more competent in supplying energy. Bulk quantities of lithium batteries are needed to run numerous electronic devices. So, MVS Engineering Pvt. Ltd provides a powerful PSA oxygen generator, which supplies oxygen for battery manufacturing procedures in production sites.
Features of the plant producing oxygen for battery manufacturing
As oxygen is needed to manufacture modern batteries, a continuous supply of this gas is needed by battery manufacturers. They rely on the onsite oxygen generators of MVS Engineering, which are marked with the following aspects.
The small size of the device
The oxygen generators of MVS Engineering are very compact in sizes. Thus, these can be installed near the production area of a battery manufacturing company. Industry owners do not need to worry about finding a suitable place to install it, as it can be installed anywhere within the factory premises.
Flowing speed of oxygen
After the oxygen is produced, it flows out of the PSA generator at a convenient speed that suits the production of batteries. Usually, this speed varies from 1nm3/hr to 200nm3/hr to supply oxygen for battery manufacturing processes. If a higher speed is required at any production site, a VPSA generator can be used to meet the requirement.
Purity of produced oxygen
Only pure oxygen can be used in a Lithium-oxygen battery, as impurities can stop the flow of ions between the electrodes. The oxygen generator of MVS Engineering is designed to produce 95% pure oxygen, containing only traces of nitrogen and argon, both of which are inert gases. However, if 99% purity is needed, then this device may not be the ideal choice.
Pressure for delivering oxygen
The oxygen plant delivers pure oxygen under the pressure of 5 Kg/cm2g, which is suitable for battery production. If higher pressure is essential in any production site, an additional booster can help in achieving the required result.
Dryness of oxygen
The oxygen produced by a PSA generator of MVS Engineering usually has a dew point of – 40°C. MVS Engineering also offers a tool for measuring the dryness of oxygen to ensure the smooth production of batteries.
Also Read
-
Use Of An Oxygen Plant For Glass Manufacturing In Glass Industries
-
Qualities Of An Oxygen Plant Producing Oxygen For Battery Manufacturing
-
-
Get A Cost-Effective Oxygen Generation Solution With MVS Engineering
-
Ecological And Sustainable Benefits Of Onsite Generation By Using MVS Generators
Thus, the oxygen generator of MVS Engineering is the best option for having a steady supply of oxygen for battery manufacturing.
